Photo Gallery

Vacuum Tube Tesla Coil
This is one of my favourite Tesla Coils I currently have. It’s a valve-based Tesla Coil referred to as VTTC for Vacuum Tube. It is a very smooth operator, as the output is sinusoidal.  Running here at less than 1kW producing about 45cm arcs.   The lovely warm glow from the base is from the large Russian transmitter tube heater-cathode.  It’s very stable and fairly bullet-proof, but the primary power supply is lethal as capable of 1A at about 4kV. The larger coil in the background is around 2 or 3 kW in operation and produces arcs of around 1m.   It uses IGBT switching in H-bridge configuration on a 350V DC bus the same topology as an inverter.   These can’t run in continual wave and need to be pulsed or the transistors tend to die. It’s very noisy and if I try to run it indoors even with 50V on the DC bus it will interfere with every bit of electronic in the house.   There is a small battery TC on the bench which is safe enough to let kids play with.  They are all good at running lamps wirelessly, as you can see with some tubes on the shelf above the coil. 
Keywords: Miscellaneous

Vacuum Tube Tesla Coil

This is one of my favourite Tesla Coils I currently have. It’s a valve-based Tesla Coil referred to as VTTC for Vacuum Tube. It is a very smooth operator, as the output is sinusoidal. Running here at less than 1kW producing about 45cm arcs. The lovely warm glow from the base is from the large Russian transmitter tube heater-cathode. It’s very stable and fairly bullet-proof, but the primary power supply is lethal as capable of 1A at about 4kV. The larger coil in the background is around 2 or 3 kW in operation and produces arcs of around 1m. It uses IGBT switching in H-bridge configuration on a 350V DC bus the same topology as an inverter. These can’t run in continual wave and need to be pulsed or the transistors tend to die. It’s very noisy and if I try to run it indoors even with 50V on the DC bus it will interfere with every bit of electronic in the house. There is a small battery TC on the bench which is safe enough to let kids play with. They are all good at running lamps wirelessly, as you can see with some tubes on the shelf above the coil.

CDM_Warm_70W.jpg CDM_Fresh_70W.jpg vttc.jpg IMG_6467.JPG IMG_6448.JPG
Lamp/Fixture Information
Manufacturer:tuopeek
File information
Filename:vttc.jpg
Album name:Tuopeek / Miscellaneous
Keywords:Miscellaneous
Filesize:530 KiB
Date added:Oct 05, 2025
Dimensions:2500 x 2023 pixels
Displayed:12 times
DateTime Original:2025:10:05 16:14:31
Exposure Time:1/25 sec
FNumber:f/3.5
File Source:Digital Still Camera
Flash:No Flash
Focal length:18 mm
ISO:3200
Model:NIKON D3400
Software:Adobe Photoshop Elements 2.0
White Balance:0
URL:https://trad-lighting.net/gallery/displayimage.php?pid=992
Favorites:Add to Favorites

Comment 1 to 5 of 5
Page: 1

Max   [Oct 05, 2025 at 07:02 PM]
It's very brave of you to run your Tesla coil so close to sensitive equipment, even if it's not your biggest one. I like that "ESD protection area" notice in particular Laughing In our HV lab we have a very long Christmas LED string that runs along grounded supports, and it still comes to life whenever out Tesla coil is switched on... Nevertheless, you have a super nice demo there, with an impressive discharge emerging from the top antenna (watch out for ozone and NOx). It's also nice seeing the discharge lamps at the back being energized.
Tuopeek   [Oct 05, 2025 at 09:20 PM]
Thanks Smile The ESD sign is to remind me the bench has a conductive dissipating surface, when I'm doing high voltage stuff. Think its more of a danger than a help. I've built up a bit of confidence over the years, for all the RF field will crash any processor and lock out a touch screen within 5 metres, they have not destroyed any semiconductor yet. (and I have tried) Although I believe pacemakers and cochlear implants need to stay clear. I suspect this is more to do with the strong magnetic fields generated rather than RF. The old 'skin-effect' seems to protect semiconductors. I do have to watch anything that may become a resonator. I have had the bridge of my nose burned as the frame of my reading glasses became a good aerial once when I got too close. Laughing Yeah, ozone becomes a bit noticeable after a short run, but a wire with corona from a few tens of kV DC will do a much better job of that.
Max   [Oct 07, 2025 at 04:55 AM]
First time I hear of ESD protection being more a danger than a safety feature. That says a lot about the nature of your hobbies Laughing
Sammi   [Oct 07, 2025 at 12:16 PM]
@Tuopeek - Ouch.! Mind Blown
Ria   [Oct 07, 2025 at 07:34 PM]
All that mega-high voltage stuff scares the life out of me..! 415V 3-phase is high enough for me Short Circuit Mind Blown Mr. Green

Comment 1 to 5 of 5
Page: 1