Photo Gallery

Home > User galleries > Ria > Control Gear
Return to the thumbnail page FILE 159/490 Return to start See previous file See next file Skip to end
Philips 66W SOX-E Gear on Test/Demo Board Here is a set of gear to run a 66W SOX-E lamp. It consists of a Philips BSX 66 H66 ballast, an SX70 ignitor and a 7.6ÂF 450V capacitor. The circuit does actually specify a 7.7µF 300V capacitor but I did not have one, however this one is still well within the circuit specification. Note from the diagram that the capacitor connects in series with the lamp and ignitor, so is essential to the circuit. The lamp plugs into the BS546 5A socket at the bottom left. Keywords: Gear

Philips 66W SOX-E Gear on Test/Demo Board

Here is a set of gear to run a 66W SOX-E lamp. It consists of a Philips BSX 66 H66 ballast, an SX70 ignitor and a 7.6ÂF 450V capacitor. The circuit does actually specify a 7.7µF 300V capacitor but I did not have one, however this one is still well within the circuit specification. Note from the diagram that the capacitor connects in series with the lamp and ignitor, so is essential to the circuit. The lamp plugs into the BS546 5A socket at the bottom left.
Philips_131W_SOX-E_gear.jpg 91W_SOX-E_Ballast_Board.jpg 66W_SOX-E_Ballast_Board.jpg 36W20SOX-E20Ballast20Board.jpg 26W20SOX-E20Ballast20Board.jpg
Lamp/Fixture Information
Manufacturer:Philips Lighting
Model Reference:Ballast - BSX 66 H66 / Ignitor - SX70 / Capacitor - Not known at present
Lamp
Lamp Type:Low Pressure Sodium
Filament/Radiator Type:2 x 140W U-shaped LPS arc tubes
File information
Filename:66W_SOX-E_Ballast_Board.jpg
Album name:Ria / Control Gear
Keywords:Gear
Filesize:309 KiB
Date added:Aug 31, 2024
Dimensions:2009 x 1377 pixels
Displayed:4 times
URL:https://trad-lighting.net/gallery/displayimage.php?pid=420
Favorites:Add to Favorites

Comment 1 to 2 of 2
Page: 1

Max   [Aug 31, 2024 at 10:30 AM]
Neat setup!
Ria   [Aug 31, 2024 at 01:49 PM]
Thanks, we do our best LPS

Comment 1 to 2 of 2
Page: 1