Photo Gallery

Home > User galleries > Ria > Control Gear
Return to the thumbnail page FILE 537/584 Return to start See previous file See next file Skip to end
Philips 131W SOX-E Gear on Test/Demo Board Here is a set of gear to run a 131W SOX-E lamp. It consists of a Philips BSX 131 H96 ballast, an SX131 ignitor and a 3.4µF 450V capacitor. Note from the diagram that the capacitor connects in series with the lamp and ignitor, so is essential to the circuit. Interestingly, the ignitor is also a 3-wire type as opposed to the usual 2-wire parallel ignitor used on most SOX lamp circuits. [i][b]Before anyone comments, I am fully aware that the ballast diagram does specify a 650V rated capacitor, but I do not have one so used this one instead for testing purposes. I will obtain the correct capacitor before running the lamp again.[/b][/i] Keywords: Gear

Philips 131W SOX-E Gear on Test/Demo Board


Here is a set of gear to run a 131W SOX-E lamp. It consists of a Philips BSX 131 H96 ballast, an SX131 ignitor and a 3.4µF 450V capacitor. Note from the diagram that the capacitor connects in series with the lamp and ignitor, so is essential to the circuit. Interestingly, the ignitor is also a 3-wire type as opposed to the usual 2-wire parallel ignitor used on most SOX lamp circuits.

Before anyone comments, I am fully aware that the ballast diagram does specify a 650V rated capacitor, but I do not have one so used this one instead for testing purposes. I will obtain the correct capacitor before running the lamp again.

Zltrnc.jpg 66W_SOX-E_Ballast_Board.jpg Philips_131W_SOX-E_gear.jpg 20180211_184239.jpg 20180211_184239~0.jpg
Lamp/Fixture Information
Manufacturer:Ballast and ignitor - Philips, capacitor - Miflex
Model Reference:Ballast - BSX 131 H96 / Ignitor - SX131 / Capacitor - Not known at present
Lamp
Lamp Type:Low Pressure Sodium
Filament/Radiator Type:U-shaped LPS arc tube
File information
Filename:Philips_131W_SOX-E_gear.jpg
Album name:Ria / Control Gear
Keywords:Gear
Filesize:348 KiB
Date added:Aug 30, 2024
Dimensions:2005 x 1479 pixels
Displayed:5 times
URL:https://trad-lighting.net/gallery/displayimage.php?pid=422
Favorites:Add to Favorites

Comment 1 to 3 of 3
Page: 1

Sammi   [Aug 30, 2024 at 11:34 PM]
We got a good deal on buying all of the correct gear for the SOX-E lampses. Love LPS
wide-lite 1000   [Aug 30, 2024 at 11:37 PM]
Honestly , the capacitor shouldn't be much of an issue for short term use . I didn't notice I had initially installed the wrong voltage cap in my Wide-Lite . It worked fine for about 100 hrs, before it finally failed . Embarrassed
Ria   [Aug 30, 2024 at 11:44 PM]
That's good to know. I might be able to make up the values required with two capacitors, I'll have to check to see what I've got in the big box of caps we have.

Comment 1 to 3 of 3
Page: 1